1.4545 Stainless Steel Round Bar 15-5PH Polished Round Bar S15500 Forged Round Bar

1.4545 Stainless Steel Round Bar 15-5PH Polished Round Bar S15500 Forged Round Bar

Type 15-5 PH is a martensitic precipitation-hardening stainless steel that provides high strength,

good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C)

and good toughness in both the longitudinal and transverse directions in both base metal and welds.

Short-time, low-temperature heat treatments minimize distortion and scaling.

Type 15-5 PH is the ferrite-free version of Type 17-4 PH stainless steel.
Both alloys are widely used in the aerospace, chemical, petrochemical, food processing, paper and

general metalworking industries.

Physical Properties:

• Melting Point: 2560 - 2625°F (1404 – 1440°C)
• Density: 0.282 lbs/in3 / 7.78 g/cm3
• Modulus of Elasticity in Tension: 28.5 X 106 psi / 196 GPa

Mechanical Properties:

Condition: Solution Treated (A)

• Tensile Strength Minimum (psi): 160,000
• Yield Strength Minimum 0.2% offset (psi): 140,000
• % Elongation in 2” Typical: 8%
• Hardness: Rockwell C35

Condition: Aged (H1075)

• Tensile Strength Typical (psi): 162,000
• Yield Strength Typical 2% offset (psi): 160,000
• % Elongation in 2": 12%
• Hardness: Rockwell C38

Condition: Aged (H900)

• Tensile Strength Typical (psi): 210,000
• Yield Strength Typical 2% offset (psi): 200,000
• % Elongation in 2": 9%
• Hardness: Rockwell C46

Composition: weight %

Heat Treatments:

15-5 is typically supplied in Condition A, and can be heat treated at a variety of temperatures and

times to achieve a wide range of properties. Below is a sampling of standard heat treatments for

Condition A 15-5 material:

We are looking forward to receiving your enquiry.

S15500 Stainless Steel Round Bar

1.4545 Stainless Steel Round Bar

1.4545 Stainless Steel Round Bar 15-5PH Polished Round Bar S15500 Forged Round Bar Images